Epson DFX-5000 Dot Matrix Printer, 533 cps
Manufacturer: Epson
Part # DFX-5000
$795.00
Epson Dot Matrix Printer DFX-5000, 9-pin Impact
Epson DFX-5000 printers are capable of speeds up to 533 characters per second.The Epson DFX-5000 Dot Matrix printer achieves reliable high quality printing while achieving the lowest cost per page.
Why buy an impact printer?
An impact printer has several advantages over any other type of printer:
- Low cost – both in purchase price and low cost of ownership
- Flexible paper handling – only impact printers can handle multi-part forms and multiple paper paths that can all have paper loaded and waiting.
- Reliability – EPSON impact printers are renowned for their reliability with tireless printheads and superior quality ribbons.
Impact printers are either 9- or 24-pin, which determines the type of printing and the number of multi-part forms that the printer is capable of printing.
Nine-pin impact printers – These printers have the sturdiest printhead pins. The pins hit the paper hard to make impressions through the thickest multi-part forms. They also offer the fastest print speeds, printing from high speed draft up to near letter quality.
Twenty-four-pin impact printers – These printers have finer printhead pins. The pins hit the paper less hard to make impressions through most multi-part forms. They also offer finer letter quality printing. Print speeds vary from high speed draft up to letter quality.
The name of an Epson impact printer tells you if it is a 9- or a 24-pin printer, and whether it has a narrow or wide carriage:
- Nine-pin printers all begin with FX, LX, or DFX
- Twenty-four pin printers all begin with LQ
- Wide carriage printers have 4 number in their names
- Narrow carriage printers have 3 numbers in their names
DFX-5000 DOT MATRIX PRINTER
Printable area: Continuous paper 4 to 16 inches
Ribbon: cartridge
Power: cable
Paper thickness:
- Front–up to 0.018 inches (0.46 mm)
- Rear-up to 0.012 inches (0.30 mm)
Printer Specifications
Number of copies: With continuous, multi-part paper only – Printing method: 9-pin Impact dot matrix
- Front: one original plus up to five copies, maximum thickness of 0.018 inches (0.46mm)
- Rear-one original plus up to three copies, maximum thickness of 0.012 inches (0.30mm)
Mechanical Ribbon : Cartridge ribbon, available in black only (#8766). Do not use this ribbons for 24-pin printers.
Bidirectional logic seeking for characters, at 14 dot/character text printing. Unidirectional for 15 million characters graphics (can also be switched to bidirectional by using the proper MCBF: For all components excluding software command).
Print Head: 13,500,000 lines with line spacing: 1/6-inch, 1/8-inch, or MTBF
6000 power-on hours programmable increments of 1/216th of an inch
Print head life: 200 million characters at 14 dots per character
Printable columns: Dimensions and Height: 14.5 Inches (367mm)
Width : 26.8 inches (680 mm)
Depth : 15.0 inches (382.5)
Weight: approx. 65 lbs. (30kg)
There are no reviews yet.